List of FAQS

How equipment is required follow WHO GMP?

06/09/2021 | 5886

Similar question:

Reply:

Equipment must be located, designed, constructed, adapted and maintained to suit the operations to be carried out. The layout and design of equipment must aim to minimize the risk of errors and permit effective cleaning and maintenance in order to avoid cross-contamination, build-up of dust or dirt, and, in general, any adverse effect on the quality of products.
Equipment should be installed in such a way as to minimize any risk of error or of contamination.
Fixed pipework should be clearly labelled to indicate the contents and, where applicable, the direction of flow.
All service pipework and devices should be adequately marked and special attention paid to the provision of non-interchangeable connections or adaptors for dangerous gases and liquids.
Balances and other measuring equipment of an appropriate range and precision should be available for production and control operations and should be calibrated according to a fixed schedule.
Production equipment should be thoroughly cleaned according to a fixed schedule.
Laboratory equipment and instruments should be suited to the testing procedures undertaken.
Washing, cleaning and drying equipment should be chosen and used so as not to be a source of contamination.
Production equipment should not present any hazard to the products. The parts of the production equipment that come into contact with the product must not be reactive, additive, or absorptive to an extent that would affect the quality of the product.
Defective equipment should be removed production and QC areas. If this is not possible, it should be clearly labelled as defective to prevent use.
Closed equipment should be used whenever appropriate. Where open equipment is used or equipment is opened, precautions should be taken to minimize contamination.
Non-dedicated equipment should be cleaned according to validated cleaning procedures between being used for production of different pharmaceutical products to prevent cross-contamination.
Current drawings of critical equipment and support systems should be maintained.

Many leading analytical balance manufacturers provide built-in "auto-calibration" features in their balances. Are such auto-calibration procedures acceptable instead... See more Many leading analytical balance manufacturers provide... See more

Is there a list of CDER-approved drug manufacturing equipment? See more Is there a list of CDER-approved... See more

Can Total Organic Carbon (TOC) be an acceptable method for detecting residues of contaminants in evaluating cleaning effectiveness?... See more Can Total Organic Carbon (TOC) be... See more

What are the cleaning validation requirements for potent compounds (e.g., compounds that are cytotoxic, mutagenic, or have high... See more What are the cleaning validation requirements... See more

How do I perform cleaning validation, including for homeopathic drug products? See more How do I perform cleaning validation,... See more

Does equipment need to be clean enough to meet limits based on the most sensitive possible methods of... See more Does equipment need to be clean... See more

Is testing rinse solution enough to support residue determinations for cleaning validation? See more Is testing rinse solution enough to... See more

Does FDA prefer one type of material over another (e.g., polyvinylidene difluoride over stainless steel) for construction of... See more Does FDA prefer one type of... See more

If a procedure’s ability to clean a piece of equipment made of a particular material, such as 316... See more If a procedure’s ability to clean... See more

12 3 4..>